AA S4 Recoil Clutch Kit with Primary and Secondar Clutches for 2014-15 Polaris RZR XP 1000

• Fits 2014-15 RZR 1000 XP Models 2 & 4 Seat (Does NOT fit 2016+ RZR XP 1000 Models)
• The absolute ultimate kit for your 2014-15 RZR XP 1000! This clutch kit replaces your entire primary clutch, secondary clutch and all internals... completely new clutching with the AA high performance clutch kit. The secondary clutch is a Team Tied loaded with our performance helix and spring. This is the same clutch that came on from the factory in the 2014-15 years. The primary clutch that comes with this kit is the same as the factory clutch, but with AA HD buttons.

Our S4 Recoil Clutch Kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or racetrack you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes you'll see the same benefits but also have much less bogging when climbing that big dune. The machine will hold RPM so you can get where you need to go and get there faster! Going mudding? Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. We know you'll be extremely pleased with the performance gain from our S4 clutch kits!

The secondary clutch comes professionally set up and is ready to bolt on. It is a Team Tied loaded with our performance helix and spring. This is the same great clutch that came on from the factory in the 2014-15 years.

• Kits work great with both stock or modified machines
• A simply must-have when running larger tires or paddles
• Much faster acceleration
• Wicked throttle response and quicker downshifts
• More consistent clutch performance
• Engine braking in the secondary clutch can be removed for more free wheeling when off the throttle
• Less belt slap on the clutch cover which improves belt life and longevity
• Cooler running belt temps (especially when running larger tires or paddles!)

Our Recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market (nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for the best performance for your application.
A great initial setup guideline is included which shows the best setups for dunes, mud, or all around trail riding. This also has brief instructions on installing your clutch kit and other important information.

We offer two clutch kits:

• Standard Load: The Standard Load clutch kit is meant for stock or near stock size tires (28-30") and is the one for most fast pace trail riders or racers.
• High Load: The High Load clutch kit is meant for those with larger tires (31-32"), mud tires, dune riders, and those with paddles 28" or larger. Mudding and dune riding are considered high load and must be clutched slightly different. If planning to run 34-35" tires on stock gearing please contact us about a stiffer secondary spring.

Engine Braking Option: Choose between keeping engine braking like factory or removing it. Most faster pace trail riders/racer or dune riders will choose to remove it. Most slower pace riders like mud, crawling or very hilly terrain will keep the EBS in place.