Aftermarket Assassins Custom Tuned DynoJet Powervision 3 for Polaris Ranger XP 1000 Dual Cam (2017+)
Aftermarket Assassins Custom Tuned DynoJet Powervision 3 | Polaris Ranger XP 1000 Dual Cam (2017+)
Easily load your custom tuning with DynoJet's Powervision 3. The Power Vision fuel tuner can hold multiple tunes right on the device, which means that you can reflash your ECU changing conditions right from the trail. You can leave the Powervision hooked up for gauges, or completely remove it after flashing your ECU. The Powervision also has excellent data logging capabilities if you download the software, and use your laptop. You can even view trouble codes and erase them on the fly.
Available Tunes
- (87 Octane) - The Level 1 tune is the most common and is meant for the factory exhaust system, and no other major engine modifications. When properly clutched, this tune is capable of 95-100 HP on 91 octane fuel. With the 87 octane timing curve, you would see around 90-92 HP. Peak power is made between 7500-7800 RPM, so clutching is highly recommended for best performance.
- (91+ Octane) - The Level 2 tune has all the features of the Level 1 tune but with fueling designed for an exhaust system. Gains would depend on the exhaust that you are using, but normally would show another 5-7 RWHP(10 Crank).
- Available Clutch Kit Pictured Below -
Features
- Tuners IN STOCK available to SHIP SAME DAY!
- Comes standard with 1 Aftermarket Assassins Tune & The DynoJET Pre-loaded tunes
- Additional tunes available for purchase
- Rev limiter raised
- Lowered Cooling Cycle for overall cooler tempss
- Handheld PV3 comes with capabilities to read and clear diagnostic trouble codes
Fitment
- 2017+ Polaris Ranger XP 1000 DOHC 2 or 4 Door
**2022+ Northstar Models Only** If you are having check engine codes 520625/3, 4, or 5 and you have verified your charging system is working correctly, we have the fix for you!
