STM Rage 4WCP Can-Am Defender / X3 Primary Clutch
- This clutch offers extremely good throttle response. Works best is fast pace Racing applications.
- New improved two-way bearing design. The main shaft bearing is now smaller with a 47mm outside diameter allowing a lower initial take off ratio than the past design. Allows tighter belt deflection and smoother transmission shifting.
An affordable replacement for the stock primary clutch. Complete billet design that out performs the existing primary. Using STM adjustable supertip cam arms with the Rage 4 is the perfect recipe for your stock or modified Can Am. These STM clutches will fit under the stock cover with no interference. The Rage 4 is capable of using most cam arms that are available on the market.
The cover is designed to use Polaris ATV springs which provides a wide variety of spring rates to choose from.
The Rage 4 comes calibrated with a spring and set of STM adjustable supertip cam arms.
Utilizes stock bolt for installation.
Each clutch is assembled and setup to run the BRP OEM belt
This primary will work with the stock secondary.
**When ordering please use these guidelines to help choose your options or contact us with further questions**
Choose Engine HP – Let us know about your bike - Is it naturally aspirated/stock? Big Bore Kit? Does it have a turbo? If you choose turbo-how much boost? This gives us an idea of how to set the weights up.
Shop by Manufacturer | CanAm |
---|---|
Shop by Brand | STM Powersports |